From: Steven Frost (Steven.Frost@powerco.co.nz)
Date: Wed Aug 28 2002 - 18:35:18 EDT
Hi -- thanks to James Sainsbury ( /sbin/init.d/xlogin restart )
and Kevin Dea ( kill -HUP `ps aux|grep X11X authfiles etc )
and Peter Stern ( xlogin stop , xlogin start)
Kevin's suggestion didn't work. James's made the entire system hang. Never
mind. INothing appeared on the console so I plugged in the tried and true
monitor keyboard and mouse next to the actual machine and rebooted.. I
wonder if sharing a KVM switch with other intel boxes, citrix servers etc
caused the initial problem . Thanks.
Hi -- have a problem where the CDE desktop is not appearing thru a KVM
switch. Can telnet to the server OK.
It is in a new server room where all the boxen's screens etc go out to
anothr room via KVM switches.
Is there any way to refresh the CDE without dong a reboot?
Thanks
Steven Frost
Unix system admin
Powerco Limited
204 Taupo Quay
Wanganui NZ.
DDI +64 6 3490372 Fax +64 6 3490317
**********************************************************************
CAUTION: This email and any attachments may contain information that is confidential. If you are not the intended recipient, you must not read, copy, distribute, disclose or use this email or any attachments. If you have received this email in error, please notify us and erase this email and any attachments. You must scan this email and any attachments for viruses.
DISCLAIMER: Powerco Limited accepts no liability for any loss, damage or other consequences, whether caused by its negligence or not, resulting directly or indirectly from the use of this email or attachments or for any changes made to this email and any attachments after sending by Powerco Limited. The opinions expressed in this email and any attachments are not necessarily those of Powerco Limited.
**********************************************************************
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:50 EDT