From: Dejan Muhamedagic (dejan@hello-penguin.com)
Date: Fri Aug 23 2002 - 12:02:59 EDT
Hello,
A colleague ran the test on the VGA console and it has worked
flawlessly. When I tried on the serial line, it would leave my
keyboard unusable. Hence, the question should have been if it's
possible to run the test over the serial line.
I suppose that one of the test procedures somehow interacts with
the serial communication. Also, the DS20E reference guide
mentions the '-omit' option where one can specify devices which
should not be tested. This option is not accepted by this SRM
version.
If anybody knows how to run the tests over the serial line, see
the results over there, and be able to do some typing afterwards
I'd still like to hear about it.
Thanks to
alan@nabeth.cxo.cpqcorp.net
Jay Vlack
for the support.
Cheers.
Dejan
> Hello,
>
> This is not really about Tru64, but I don't know where else to
> turn to for help.
>
> I wanted to include the SRM test command in the general test
> procedure for a customer. However, it always makes the system
> freeze. The question is:
>
> How to run the SRM test command so that it does not put the system
> in a freeze mode?
>
> The system is AlphaServer DS20E. The SRM version is V6.2-1.
>
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:50 EDT