From: Reiner Dassing (dassing@wettzell.ifag.de)
Date: Fri Aug 16 2002 - 10:18:08 EDT
Hello!
I tried to upgrade TRU64 V5.1 TruCluster to V5.1A.
But I had not regarded that the OS TRU64 V5.1 must be upgraded
to Patch #3 before doing the upgrade.
Therefore, I made some mistakes during the upgrade.
Now, I have a single node cluster of one member running on TRU64 V5.1A.
To correct my problems I should delete the other member and add it later on.
The problem is, that the boot partition of the member to be deleted is not
reachable.
hwmgr -show -scsi -full shows a stale path
Does anybody have an idea how to correct the stale path to dsk18
being on a HSG80 via fibre Channel?
Or, do I have to restore my backup?
Any help would be appreciated.
Output of "hwmgr -show -did 20 -full":
SCSI DEVICE DEVICE DRIVER NUM DEVICE FIRST
HWID: DEVICEID HOSTNAME TYPE SUBTYPE OWNER PATH FILE VALID PATH
-------------------------------------------------------------------------
84: 20 sweaty disk none 0 1 dsk18
WWID:01000010:6000-1fe1-0009-4870-0009-0280-4276-000e
BUS TARGET LUN PATH STATE
------------------------------
0 1 3 stale
--
--
Mit freundlichen Gruessen / With best regards
Reiner Dassing
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:49 EDT