From: J Bacher (jb@jbacher.com)
Date: Tue Jul 23 2002 - 15:46:07 EDT
Tru64 5.1a
I labeled dsk2 (all partitions unused) and added it to LSM via initialization.
I decided to remove it, create the domain and fileset, and add it in via
encapsulation.
I removed dsk2 from LSM and relabeled, created the domain, fileset, and
mounted the device.
When I go to add the disk to LSM using encapsulation, I receive the
following error:
------------------------
Continue with encapsulation? [y,n,q,?] (default: y)
The disk device dsk2 will be encapsulated and added to the disk group
rootdg.
The encapsulation operation failed with the following error:
Setting up encapsulation for dsk2.
dsk2 is already in use by LSM:
--------------------------
The device does not have an associated LSM disk media name nor group and it
does not have LSM partitions.
I obviously did not back out of the original LSM configuration
properly. What steps do I need to perform to remove dsk2 from the LSM
database so that I might [properly] encapsulate it for LSM use?
Tia.
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:46 EDT