From: Danny Petterson (danny.petterson@dmsn.dk)
Date: Wed Jul 17 2002 - 14:00:43 EDT
Hi Guru's!
Im sitting with a trucluster 5.1, (two DS20's, 1 HSG60), and have an anoying
problem:
When the first node boots (nomatter what node), it hangs when it getts to
the Quorum-disk part (QNX QDISK).
If I leave it at that state I can boot the other node, without a problem.
When the other node then is up, I can restart the hangning node, and this
time it works, but through the upstart it gives a:
rm error: mchan0 error_type = 0x40000000 error_count = 0x0 time =
0x70a1900000021
mcerr = 0x0 lcsr = 0x7c mcport = 0xf6000000
And then goes on, starting up perfectly.
No errors from mc_diag and mc_cable.
..just to be sure, the same error can come on both nodes, it depends on
witch node comes up first.
Thanx in advance
Danny Petterson
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:46 EDT