From: rob.leadbeater@lynx.co.uk
Date: Fri Jul 12 2002 - 07:28:40 EDT
Hi,
We've recently moved the storage for our GS60 (v5.1A) onto a pair of dual
redundant HSG80's
The main data area is a Raid 0 stripe created from 4 three way mirrors.
In order to backup the system, we are planning on dropping out one member
of each mirrorset, and mounting them up on a separate DS20 (v5.1A).
We've managed to do this successfully from the command line, via Command
Scripter, but we're running into problems with scripting things, due to
the potential for things to go wrong - ie the need to check that each
three way mirror has three good members before you reduce it to two etc.
etc.
Trapping errors with cmdscript, does not seem particularly easy, mainly
because of the variety of errors which could be returned by the various
parts of the system.
Is anyone aware of any "off the shelf" scripts that can be used, albeit
with some customization, which would do what we want ?
Regards,
Rob Leadbeater
This message is intended only for the use of the person(s) ("The intended
Recipient(s)") to whom it is addressed. It may contain information which
is privileged and confidential within the meaning of applicable law. If
you are not the intended recipient, please contact the sender as soon as
possible. The views expressed in this communication are not necessarily
those held by LYNX Express Limited.
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:46 EDT