From: Claudio Lapidus (clapidus@hotmail.com)
Date: Wed Jul 10 2002 - 23:47:47 EDT
On Wed, 03 Jul 2002, Claudio Lapidus wrote:
>Here we have an XP900 which has been running fine for months. On the last
>days, it started to freeze unexpectedly. It stops responding to both remote
>and local access. As seen from the network, it just doesn't respond. On the
>local console, the screen goes black and doesn't respond to keybd or mouse.
>After power cycling, /var/adm/messages shows nothing but the normal boot
>sequence. OS version is 4.0F
>
>Can someone give advice as to how to start diagnose this problem?
>
Now, thanks to some advice given by members of this list, last time it
happened I pressed the halt button and at the SRM prompt I issued the crash
command. Here is the result:
>>>crash
CPU 0 restarting
CP - RESTORE_TERM routine to be called
DUMP: 2048000 blocks available for dumping.
DUMP: 38258 wanted for a partial compressed dump.
DUMP: Allowing 2043902 of the 2047998 available on 0x808001
device string for dump = SCSI 0 16 0 0 0 0 0.
DUMP.prom: dev SCSI 0 16 0 0 0 0 0, block 1024000
DUMP: Header to 0x808001 at 2047998 (0x1f3ffe)
device string for dump = SCSI 0 16 0 0 0 0 0.
DUMP.prom: dev SCSI 0 16 0 0 0 0 0, block 1024000
DUMP: Dump to 0x808001: ...: End 0x808001
device string for dump = SCSI 0 16 0 0 0 0 0.
DUMP.prom: dev SCSI 0 16 0 0 0 0 0, block 1024000
DUMP: Header to 0x808001 at 2047998 (0x1f3ffe)
succeeded
CP - RESTORE_TERM exited with hlt_req = 0, r0 = 00000001.00000000
halted CPU 0
halt code = 0
PC = fffffc0000485278
>>>
As you may guess, from this point on, I'm completely stuck. Any hints as to
how to continue?
TIA,
cl.
_________________________________________________________________
Chat with friends online, try MSN Messenger: http://messenger.msn.com
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:46 EDT