From: Brewer, Edward (BREWERE@OD.NIH.GOV)
Date: Wed Jul 10 2002 - 11:28:49 EDT
Admins,
I found this post earlier and it didn't work on our DS10. I retried
it and attempted pushing the halt button for a second time and that was the
trick.
Lee Brewer
1. Make sure the Halt button is in the "out" position (not lit).
2. Enter the login command: P00>>> login
3. When the Enter Password: prompt is displayed, press the Halt button (the
button should light up), then press <Return>.
4. Press the Halt button to the "out" position (not lit).
The password is now cleared and the console cannot be put into secure mode
unless you set a new password.
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:46 EDT