From: MMP Wolfgang Rupp (wolfgang.rupp@mm-packaging.com)
Date: Wed Jul 03 2002 - 07:16:11 EDT
Bjorn Ramqvist was the first to respond. His suggestion did it:
> I do not think you need to set any units "offline".
> Just type "set [unit] disable=all enable=conn1,conn2,..."
> (on the same line) and I THINK that's going to be invisible
> for the host.
Other suggestions included:
a) Selective disabling of unwanted connections. The Compac docs
say this will not prevent new connections from getting access.
b) Michael Polnick suggested the SWCC GUI, which he already used.
Sorry, I have no idea what the SWCC GUI is. But I will RTFM :-)
Michael Polnick also said:
> It cannot be done if there is no connection which
> can be disabled (only one valid path, no other host).
My controllers dual redundant.
Maybe it would not have worked with a single path setup.
thanks to all
Wolfgang Rupp
Network Administrator
MM Packaging Europe GmbH
Floragasse 7
A-1040 Wien
Tel: +43-1-50257-238
Fax: +43-1-50257-260
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:45 EDT