From: Huegli Dominique (hud@semafor.ch)
Date: Tue Jul 02 2002 - 05:39:32 EDT
Hello...
I replaced a defective tape drive with the same drive. It's a
Scorpion 240 DDS-4 Autoloader. Amanda (backup system,
uses dump) did one correct backup after the installation.
But now, nothing works....
Thanks
Dominique
AMANDA error:
Amanda Tape Server Host Check
-----------------------------
/usr/dumps: 10170888 KB disk space available, that's plenty.
amcheck-server: slot 5: slot is empty
amcheck-server: slot 6: slot is empty
amcheck-server: slot 1: slot is empty
amcheck-server: slot 2: slot is empty
amcheck-server: slot 3: slot is empty
amcheck-server: slot 4: slot is empty
ERROR: new tape not found in rack.
(expecting a new tape)
NOTE: skipping tape-writable test.
Server check took 12.564 seconds.
Amanda Backup Client Hosts Check
--------------------------------
Client check: 1 host checked in 0.190 seconds, 0 problems found.
(brought to you by Amanda 2.4.1p1)
(The tapelist is empty....)
> mt -f /dev/rmt0h status
DEVIOGET ELEMENT CONTENTS
---------------- --------
category DEV_TAPE
bus DEV_SCSI
interface SCSI
device DAT 0
adpt_num 0
nexus_num 0
bus_num 0
ctlr_num 0
slave_num 4
dev_name tz
unit_num 4
soft_count 0
hard_count 0
stat 0x5
DEV_BOM DEV_OFFLINE
category_stat 0x0
DEV_97000_BPI
DEVGETINFO ELEMENT CONTENTS
------------------ --------
media_status 0x10001
BOM POS_VALID
unit_status 0x1a2
Offline 2_FM_Close Rewind Compacting Buffered
record_size 0
density (current) 97000 BPI
density (on write) 0 BPI
Filemark Cnt 0
Record Cnt 0
Class 2 - RDAT
MTIOCGET ELEMENT CONTENTS
---------------- --------
mt_type MT_ISSCSI
mt_dsreg 0x5
DEV_BOM DEV_OFFLINE
mt_erreg 0x2 Unit is not ready.
mt_resid 0
mt_fileno 0
mt_blkno 0
DEV_EEI_STATUS
version 0x2
status 0x3200 Device inoperable (needs initialize)
flags 0x1000007
CAM_STATUS SCSI_STATUS SCSI_SENSE CAM_DATA
cam_status 0x4 CCB request completed with an err
scsi_status 0x2 SCSI_STAT_CHECK_CONDITION
scsi_sense_data (hex)
70 0 2 0 0 0 0 a
0 0 0 0 3a 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0
ASC/ASQ = 3a/0 Medium not present
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:45 EDT