mixing UltraSCSI and Fibre shared buses

From: Valikhovsky, Vladislav (Vladislav.Valikhovsky@acs-inc.com)
Date: Wed Jun 26 2002 - 17:10:39 EDT

• Next message: Michael Bucholtz: "Can't rewrite terminal control entry for..."
• Previous message: Neil R. Smith: "variable block size tape device"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello,

We are planning to purchase a two member ES45 cluster with an MA8000 storage
array. We already have a two member GS60 cluster using an ESA10000 array on
a shared UltraSCSI bus. OS is 5.1A and I would like to know whether we can
configure four nodes - 2xGS60 + 2xES45 and two shared buses - one
UltraSCSU-based (ESA10000) and one fibre-based (twp 16port switches with an
MA8000 array). Are there any know issues with mixing UltraSCSI with fibre?

Thanks,
Vladik Valikhovsky
ACS

• Next message: Michael Bucholtz: "Can't rewrite terminal control entry for..."
• Previous message: Neil R. Smith: "variable block size tape device"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:44 EDT