From: Jeff Foster (jfoster@uclink.berkeley.edu)
Date: Tue Jun 18 2002 - 13:33:29 EDT
I got several suggestion all seem useful.
first I need a correction in my original post,
the nic is a de500, not de200.
during boot it comes up 100full.
the suggestion are:
power off the system, then restart it from cold
pull out the 2nd NIC and see if the 1st one works.
set speed in inet.local
set speed to 10 simplex
I can't get to the system until Sunday when we have a window
for work on the productions system.
more later,
and thanks again for all the wonderful suggestions,
Jeff
> hi all,
> general info gathering questions.
> I am installing 5.1a on an es-40 with 2 de-200 nics.
> after the install and several reboot, I still have no networking.
> ifconfig looks ok, default routes look ok. I have used both the
> network setup wizard and hand editing....
> I ahve installed 5.1a on a ds-20 and it worked like a camp. differnt
nic....
>
> when I boot this system under 4.0f, all is well, but the same hardware
under
> 5.1a
> I do not get networking. both cards come up as 100 full. the switch they
> are hooked to
> is a big Cisco ( 2500?). I suspect speed/duplex problems, but am wondering
> if
> anyone has seen this before on this OS/hardware combination.
>
> thanks for any ideas,
> Jeff
>
---- Jeff Foster 642-8552 ccs-sda-unix UC Berkeley
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:44 EDT