RAID 5 on RA3000 & HSZ22

From: Shaukat Riaz (shaukat.riaz@natcom.com.sa)
Date: Sat Jun 15 2002 - 09:29:24 EDT

• Next message: Greg Merrell: "Recovering LSM/AdvFS-based data from a failed system"
• Previous message: Adametz, Bluejay: "Console device names"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

            Hi Mangers, I am facing a problem with RA3000 and HSZ22 (
single controller)
                                The RA3000 is configured as RAID 5 and
running software version d11x.
                                There are five members in the RAID set.
                                Whenever a member of the RAID fails and a
new drive is hot swapped at its location the
                                new drive does not become a member of the
RAID set but shows only as available in the management
                                console. Is this the right behavior of the
RA3000?. How do I add this available drive to the RAID set?

                               Any Idea will be great help.

                              Thanks in advance.

Shaukat Riaz
email:Shaukat.Riaz@Natcom.com.sa

• Next message: Greg Merrell: "Recovering LSM/AdvFS-based data from a failed system"
• Previous message: Adametz, Bluejay: "Console device names"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:44 EDT