From: Danny Petterson (danny.petterson@dmsn.dk)
Date: Wed Apr 10 2002 - 05:29:23 EDT
Hi!
I found a solution:
First backup the entire /usr/net/servers/lanman-directory (just in case)
Stop asu
Delete the file with the domainname in /usr/net/servers/lanman/domains
Delete lsa /usr/net/servers/lanman/datafiles
Run asusetup, and reconfigure it all...do NOT use the default-answers, even
if its the same data, type them again. This will recreate lsa, sam and acl,
and everything works fine.
Thanx to everyone who answered.
Lots of greetings
Danny Petterson
Dimension A/S
-----Oprindelig meddelelse-----
Fra: Danny Petterson
Sendt: 9. april 2002 10:27
Til: 'tru64-unix-managers@ornl.gov'
Emne: ASU-problem
Hi Managers!
Got a problem with Advanced Server:
I get these errors once every minute (the Tru64/Asu-box is called CENTER,
the PDC called KENNY):
Event Type: Warning
Event Source: NETLOGON
Event Category: None
Event ID: 5718
Date: 26-03-2002
Time: 13:40:19
User: N/A
Computer: CENTER
Description:
The full synchronization replication of the SAM database from the primary
domain controller \\KENNY failed with the following error:
A device attached to the system is not functioning.
Data:
0000: 01 00 00 c0 ...À
Event Type: Error
Event Source: NETLOGON
Event Category: None
Event ID: 5730
Date: 26-03-2002
Time: 13:40:19
User: N/A
Computer: CENTER
Description:
Replication of the SAM Global Group "Rid: 0x201" from primary domain
controller \\KENNY failed with the following error:
A device attached to the system is not functioning.
Data:
0000: 01 00 00 c0 ...À
Event Type: Error
Event Source: NETLOGON
Event Category: None
Event ID: 5730
Date: 26-03-2002
Time: 13:40:19
User: N/A
Computer: CENTER
Description:
Replication of the SAM Global Group "Rid: 0x200" from primary domain
controller \\KENNY failed with the following error:
A device attached to the system is not functioning.
Data:
0000: 01 00 00 c0 ...À
Event Type: Error
Event Source: NETLOGON
Event Category: None
Event ID: 5732
Date: 26-03-2002
Time: 13:40:16
User: N/A
Computer: CENTER
Description:
Replication of the SAM User "repluser" from primary domain controller
\\KENNY failed with the following error:
A device attached to the system is not functioning.
Data:
0000: 01 00 00 c0 ...À
------
Ive tried to repair the SAM-database with samcheck, but with no luck. The
funny thing is, that if I restart ASU new users etc. gets synchronized.
Any ideas?
Thanx a lot for your time.
Greetings
Danny Petterson
Denmark
This archive was generated by hypermail 2.1.7 : Sat Apr 12 2008 - 10:48:37 EDT