From: Dan.Burton@trilogy.com
Date: Wed Apr 30 2003 - 12:16:31 EDT
I've got an Ultra 5 that was sans hard drive. I put a new drive in it, and
I'm trying to jumpstart it (I've already set everything up on the jumpstart
server) but it doesn't get very far...
Rebooting with command: boot net - install
Boot device: /pci@1f,0/pci@1,1/network@1,1 File and args: - install
and it will just sit there. Is there anything I can try to do to at least
figure out what's wrong? Also, if it's a bad network card, can I just
stick a PCI network card in there, and jumpstart from it? How would I
specify that it's to try to use a different card to do the jumpstart?
Thanks.
-Dan
dan.burton@trilogy.com
afreet@artificialmusicmachine.com
http://www.artificialmusicmachine.com/
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:19 EDT