From: Philippe Bourdeu d'Aguerre (bda@aime.insa-tlse.fr)
Date: Tue Apr 15 2003 - 09:42:38 EDT
Hello,
I try to install an external DAT on a SUN Blade 2000. It's a SEAGATE STD124000N, DAT
DDS3 with SCSI 2 interface. I connect it through a HD68-HD50 cable but it
doesn't work:
- active terminator doesn't light on
- on "boot -r" I get error messages:
Apr 14 10:44:35 limoux scsi: [ID 107833 kern.warning] WARNING: /pci@8,700000/scsi@6,1 (glm1):
Apr 14 10:44:35 limoux Connected command timeout for Target 0.0
Apr 14 10:44:35 limoux genunix: [ID 408822 kern.info] NOTICE: glm1: fault detected in device; service still available
Apr 14 10:44:35 limoux genunix: [ID 611667 kern.info] NOTICE: glm1: Connected command timeout for Target 0.0
Apr 14 10:44:35 limoux glm: [ID 280919 kern.warning] WARNING: ID[SUNWpd.glm.cmd_timeout.6017]
Apr 14 10:44:35 limoux scsi: [ID 107833 kern.warning] WARNING: /pci@8,700000/scsi@6,1 (glm1):
Apr 14 10:44:35 limoux timeout on bus reset interrupt
Apr 14 10:44:35 limoux genunix: [ID 408789 kern.warning] WARNING: glm1: fault detected in device; service unavailable
Apr 14 10:44:35 limoux genunix: [ID 451854 kern.warning] WARNING: glm1: timeout on bus reset interrupt
- devices are not created
Can somebody confirms that SunBlade 2000 supports SCSI 2 devices ? Is there any necessary conf ?
Thanks.
-- Philippe BOURDEU d'AGUERRE _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:11 EDT