From: J Marquez (sunsol19712003@yahoo.es)
Date: Sun Apr 13 2003 - 15:15:07 EDT
Dear SunManagers, My problem is alredy solved: I needed to seat the SCSI card properly (it was in the right place -PCi riser board- but it needed to be pushed completely), besides a boot -r was needed. Thanks to:
Olson, Ross A. Michael LehmannOsama Omar Robert Geoff Reed Hichael Morton
Again thanks to all
The original problem:Date: Sat, 12 Apr 2003 19:32:48 +0200 (CEST)
From: =?iso-8859-1?q?Sun=20Sol?= <sunsol19712003@yahoo.es>
Subject: SCSI CARD FOR ULTRA 5
To: sunmanagers@sunmanagers.orgHi gurus, I am very new with Hardware stuff and I got a problem
related: I've just bought a SCSI card for my Ultra 5, but I am not sure how I
gotta plug this into my machine. I tried to connect it to the "PCI
Riser board" but when I boot the machine I could not see the SCSI card with
the "prtdiag -v" command. The SCSI card is LSI SYMBIOS. It puzzles me
that when I connect to the PCI riser board, the SCSI card has 2
interfaces without being used. Should I connect them to somewhere else in the
machine? The card did not bring with any cable.. Thanks in advance and
regards.
---------------------------------
Yahoo! Messenger
Nueva versión: Super Webcam, voz, caritas animadas, y más #161;Gratis!
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:11 EDT