From: Hong Wang (hwang@haverford.edu)
Date: Thu Apr 10 2003 - 14:31:21 EDT
We added new tape drive by issuing the two command "drvconfig, tapes". The
new tape drive looks properly installed and recognized.
But we got error when doing backup. The errors in /var/adm/messages:
Apr 10 09:33:09 nisc2 unix: WARNING: /pci@1f,0/pci@1/scsi@3,1/st@4,0 (st11):
Apr 10 09:33:09 nisc2 unix: Error for Command:
write Error Level: Fatal
Apr 10 09:33:09 nisc2 unix: Requested Block:
14 Error Block: 14
Apr 10 09:33:09 nisc2 unix: Vendor:
HP Serial Number: 62 879
Apr 10 09:33:09 nisc2 unix: Sense Key: Aborted Command
Apr 10 09:33:09 nisc2 unix: ASC: 0x4b (data phase error), ASCQ: 0x0,
FRU: 0x0
Apr 10 09:34:48 nisc2 unix: WARNING: /pci@1f,0/pci@1/scsi@3,1/st@4,0 (st11):
Apr 10 09:34:48 nisc2 unix: Error for Command:
write Error Level: Fatal
Apr 10 09:34:48 nisc2 unix: Requested Block:
4 Error Block: 4
Apr 10 09:34:48 nisc2 unix: Vendor:
HP Serial Number: 62 879
Apr 10 09:34:48 nisc2 unix: Sense Key: Aborted Command
Apr 10 09:34:48 nisc2 unix: ASC: 0x4b (data phase error), ASCQ: 0x0,
FRU: 0x0
....
In our backup report:
....
DUMP: Write error 0 feet into tape 1
DUMP: NEEDS ATTENTION: Do you want to restart?: ("yes" or "no") DUMP:
Change Volumes: Mount volume `#1' on `nisc2:/dev/rmt/0hn'
DUMP: NEEDS ATTENTION: Is the new volume (#1) mounted on
`nisc2:/dev/rmt/0hn' and ready to go?: ("yes" or "no") DUMP: Write error 0
feet into tape 1
DUMP: NEEDS ATTENTION: Do you want to restart?: ("yes" or "no") DUMP:
Change Volumes: Mount volume `#1' on `nisc2:/dev/rmt/0hn'
DUMP: NEEDS ATTENTION: Is the new volume (#1) mounted on
`nisc2:/dev/rmt/0hn' and ready to go?: ("yes" or "no") DUMP: Write error 0
feet into tape 1
....
What possible causes the error? Or the tape drive is bad?
Thanks in advance!
Hong
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:10 EDT