From: Stoyan Angelov (s_angelov@filibeto.org)
Date: Wed Apr 09 2003 - 06:28:01 EDT
hello all,
i want to connect two hosts to a A3500 contreller with 5 D1000 array
connected to it. i found in the rm 6.22.1 release notes and in the Sun
Storedge A3500 hardware config guide that this is possible but
clustering software is required. however i do not need the clustering
functionality, the hosts will not access the same arrays at a time. i
have changed the scsi-initiator-id of one of the hosts (as described in
one of sun;s blueprints documents) and have installed rm 6.22.1 on both
hosts.
as the docs say this is not a supported configuration without the
clustering software - has anyone tried such a config ? what could
possibly goes wrong if i connect the seccond host to the A3500 without
the clustering software ? (scsi bus resets ?). all help will be greatly
appreciated.
i have also checked the "Independent controller module to two hosts"
configuration but in this way i loose the redundacy of the A3500
controllers and this is not very good for my situation.
thank you for your time!
Stoyan Angelov
-- Stoyan Angelov filibeto.org e-mail: s_angelov@filibeto.org http://www.filibeto.org _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:09 EDT