From: sam (essam@chorus.net)
Date: Fri Apr 04 2003 - 18:38:42 EST
Dear brothers in arms/SUN
I purchased a used SUN e250. I tried every trick in the book to get it
to do anything, but nothing happens after OK, in vain
I got a GFX raptor and used a sun monitor, with 3 different SUN
keyboards. I used hyperterminal with null modem. All I get is OK, and no
hot key or short cut do anything.
I await your advice before I make a return on my $1500 purchase
Here is the test from hyper terminal.
Online: CPU0 Ultra-II (v10.0) 4:1 2048KB 2-2 ECache MCap 7
Online: CPU1 Ultra-II (v10.0) 4:1 2048KB 2-2 ECache MCap`
Set-Speed Reset
CPU0 has assumed the role of Boot CPU
@(#) Sun (TM) Enterprise 250 3.16 Version 1 created 1999/04/19 07:55
Online: CPU0 Ultra-II (v10.0) 4:1 2048KB 2-2 ECache MCap 7
Online: CPU1 Ultra-II (v10.0) 4:1 2048KB 2-2 ECache MCap 7
Probing keyboard for L1/L1-D...Done
Executing Power On SelfTest w/%o0 = 0000.0000.0010.1002
0>
0>@(#) Sun UltraSPARC-II 2-way UPA/PCI POST 6.0.9 04/19/99: 07:57
0>INFO: Processor 0 is master CPU.
0> <00> Init System BSS
0> <00> NVRAM Battery Detect Test
0> <00> NVRAM Scratch Addr Test
0> <00> DMMU TLB Tag Access Test
0> <00> DMMU TLB RAM Access Test
0> <00> Probe Ecache
0>INFO: 2048KB Ecache
0> <00> Ecache RAM Addr Test
0> <00> Ecache Tag Addr Test
0> <00> Invalidate Ecache Tags
0> <00> SC Dtag Probe
0>INFO: Dtag supports up to 2MB Ecache
0>INFO: Processor 1 - UltraSPARC-II.
0> <00> Init SC Regs
0> <00> SC Address Reg Test
0> <00> SC Reg Index Test
0> <00> SC Regs Test
0> <00> SC Dtag RAM Addr Test
0> <00> SC Dtag Init
0> <00> Init SC Regs
0> <00> SC Cache Size Init
1> <00> Probe Ecache
1>INFO: 2048KB Ecache
1> <00> Ecache RAM Addr Test
1> <00> Ecache Tag Addr Test
1> <00> Invalidate Ecache Tags
0> <00> Synch up Processor Ecache Sizes
1> <00> Synch up Processor Ecache Sizes
0> <00> Probe Memory
0>INFO: 256MB Bank 0
0>INFO: No memory detected in Bank 1
0>INFO: No memory detected in Bank 2
0>INFO: No memory detected in Bank 3
0> <00> Test Memory Data Lines
0> <00> Test Memory Address Lines
0> <00> Malloc Post Memory
0> <00> Init Post Memory
0> <00> Map PROM/STACK/NVRAM in DMMU
0> <00> Memory Stack Test
0> <00> Init Memory
0> <00> ECC Memory Addr Test
1> <00> DMMU TLB Tag Access Test
1> <00> DMMU TLB RAM Access Test
1> <00> Map PROM/STACK/NVRAM in DMMU
1> <00> Update Slave Stack/Frame Ptrs
1> <00> Memory Data Lines
1> <00> Memory Address Lines
0> <00> V9 Instruction Test
1> <00> V9 Instruction Test
0> <00> Memory Addr w/ Ecache Test
0> <00> Block Memory Addr Test
0> <00> Copy Post to Memory
0> <00> Map/Exec POST from Memory
0> <00> Map alternate CPUs
0> <00> Init Memory
0>INFO: 256MB Bank 0
0>INFO: No memory in Bank 1
0>INFO: No memory in Bank 2
0>INFO: No memory in Bank 3
0> <00> OBP Memory Test
0> <1f> Init Psycho
0> <1f> Psycho Cntl and UPA Reg Test
0> <1f> Psycho DMA Scoreboard Reg Test
0> <1f> Psycho Perf Cntl Reg Test
0> <1f> PIO Decoder and BCT Test
0> <1f> PCI Byte Enable Test
0> <1f> Counter/Timer Limit Regs Test
0> <1f> Timer Increment Test
0> <1f> Timer Reload Test
0> <1f> Timer Periodic Test
0> <1f> Mondo Int Map (short) Reg Test
0> <1f> Mondo Int Set/Clr Reg Test
0> <1f> Psycho IOMMU Regs Test
0> <1f> Psycho IOMMU RAM NTA Test
0> <1f> Psycho IOMMU CAM NTA Test
0> <1f> Psycho IOMMU RAM Address Test
0> <1f> Psycho IOMMU CAM Address Test
0> <1f> IOMMU TLB Compare Test
0> <1f> IOMMU TLB Flush Test
0> <1f> Stream Buff A Control Reg Test
0> <1f> Psycho ScacheA Page Tag Addr Test
0> <1f> Psycho ScacheA Line Tag Addr Test
0> <1f> Psycho ScacheA RAM Addr Test
0> <1f> Psycho ScacheA Page Tag NTA Test
0> <1f> Psycho ScacheA Line Tag NTA Test
0> <1f> Psycho ScacheA Err Status NTA Test
0> <1f> Psycho ScacheA RAM NTA Test
0> <1f> Stream Buff B Control Reg Test
0> <1f> Psycho ScacheB Page Tag Addr Test
0> <1f> Psycho ScacheB Line Tag Addr Test
0> <1f> Psycho ScacheB RAM Addr Test
0> <1f> Psycho ScacheB Page Tag NTA Test
0> <1f> Psycho ScacheB Line Tag NTA Test
0> <1f> Psycho ScacheB Err Status NTA Test
0> <1f> Psycho ScacheB RAM NTA Test
0> <1f> PBMA PCI Config Space Regs Test
0> <1f> PBMA Control/Status Reg Test
0> <1f> PBMA Diag Reg Test
0> <1f> PBMB PCI Config Space Regs Test
0> <1f> PBMB Control/Status Reg Test
0> <1f> PBMB Diag Reg Test
0> <1f> Consist DMA Rd, IOMMU miss Lpbk Test
0>STATUS=PASSED
Power On Selftest Completed
Status = 0000.0000.0000.0000 ffff.ffff.f00b.2e08
ffdf.ffff.0bd1.1111
POST Reset
CPU0 has assumed the role of Boot CPU
@(#) Sun (TM) Enterprise 250 3.16 Version 1 created 1999/04/19 07:55
Online: CPU0 Ultra-II (v10.0) 4:1 2048KB 2-2 ECache MCap 7
Online: CPU1 Ultra-II (v10.0) 4:1 2048KB 2-2 ECache MCap 7
Setting system ECache size to 2048KB
Clearing DTAGS...Done
Programming memory controller for 10ns/100MHz UPA timing
Clearing E-Cache Tags...Done
Clearing I/D TLBs...Done
Probing Memory...Done
HiMem base = 0000.0000.0000.0000 size = 0000.0000.1000.0000
Clearing Memory...including Unix Retained Memory...Done
MMUs ON
Copying ROM to RAM...Done
RAM CRC = 0000.0000.73eb.2e26; ROM CRC = 0000.0000.73eb.2e26
Decompressing into Memory...0000.0000.0004.4b8c (275KB)...Done
Size = 0000.0000.0008.48e0 (531KB)
Starting Forth kernel at 0000.0000.f005.8cbc
ttya initialized
SC Control: EWP:0 IAP:0 FATAL:0 WAKEUP:0 BXIR:0 BPOR:0 SXIR:0 SPOR:1
POR:0
System Memory Configuration:
Bank #0 64 64 64 64 : 256 MB [Available 256MB @ 0 ]
Bank #1 0 0 0 0 : 0 MB [Not In Use]
Bank #2 0 0 0 0 : 0 MB [Not In Use]
Bank #2 0 0 0 0 : 0 MB [Not In Use]
Environmental monitor: enabled
Probing Floppy: No drives detected
Initializing RSC...Done.
Primary UPA probing
Probing all UPA slots .......==> Nixing UPA slot 6
.........................Done.
At UPA Slot 0 Created Node(s)...SUNW,UltraSPARC-II
At UPA Slot 1 Created Node(s)...SUNW,UltraSPARC-II
At UPA Slot 1f Created Node(s)...pci pci
Primary I/O probing
Probing /pci@1f,4000 at Device 1 network
Probing /pci@1f,4000 at Device 3 scsi disk tape scsi disk tape
Probing /pci@1f,4000 at Device 2 Nothing there
Probing /pci@1f,4000 at Device 4 TSI,gfxp
Probing /pci@1f,4000 at Device 5 Nothing there
Probing /pci@1f,2000 at Device 0 This slot excluded from probing...
Probing /pci@1f,2000 at Device 1 Nothing there
Probing /pci@1f,2000 at Device 2 Nothing there
Probing /pci@1f,2000 at Device 3 Nothing there
Probing /pci@1f,2000 at Device 4 Nothing there
Probing /pci@1f,2000 at Device 5 Nothing there
Post-probe Cheerio fixups
Sun (TM) Enterprise 250 (2 X UltraSPARC-II 400MHz), No Keyboard
OpenBoot 3.16, 256 MB memory installed, Serial #11654831.
Ethernet address 8:0:20:b1:d6:af, Host ID: 80b1d6af.
Testing /pci@1f,4000/ebus@1
Testing /pci@1f,4000/network@1,1
Testing /pci@1f,4000/ebus@1/su@14,3062f8
Testing /pci@1f,4000/ebus@1/su@14,3083f8
Testing /pci@1f,4000/ebus@1/eeprom@14,0
Testing /pci@1f,4000/ebus@1/ecpp@14,3043bc
Testing /pci@1f,4000/ebus@1/SUNW,envctrltwo@14,600000
Testing /pci@1f,4000/scsi@3
Testing /rsc
Initializing 1 megs of memory at addr fe00000; left:
1MB 0
Initializing 254 megs of memory at addr 0; left:
254MB 252 245 238 231 224 217 210
203 196 189 182 175 168 161 154 147
140 133 126 119 112 105 98 91 84
77 70 63 56 49 42 35 28 21
14 7 6 5 4 3 2 1
0
{0} ok
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:08 EDT