From: Scott Pham (spham@incellico.com)
Date: Thu Apr 03 2003 - 15:55:47 EST
I currently have 4 HBAs that are connect to 2 t3 workgroup arrays. Each HBA is
connected to it's own brick. I had configured the meta devices to map to each
brick with their own HBA. Then I created a raid 0 from each pair. When I
reboot the system metadevadm has remapped the device to point all traffic
through one HBA for each t3 pair. So right now I'm only using 2 HBAs for each
t3, when I'm trying to use 4 HBAs. Is there a way to remap the device without
taking the system offline or recreating the metadevices? Thanks in advance and
of course I will summarize.
"They that can give up essential liberty to obtain a little temporary safety
deserve neither liberty nor safety."
- Benjamin Franklin
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:08 EDT