From: Evans, Shawn (s.evans@TriCorInd.com)
Date: Tue Apr 01 2003 - 15:43:26 EST
I am attempting to take a lun from a T3 show below and configure it within
format to have the slices shown below. Then I want to take this same disk,
and import it to Veritas, but, I only want to import slice 3 leaving 0 and 1
untouched.
Is this possable, and if so, how?
4. c4t1d0 <SUN-T300-0117 cyl 34530 alt 2 hd 32 sec 128>
/ssm@0,0/pci@1d,600000/pci@1/SUNW,qlc@4/fp@0,0/ssd@w50020f2300007f61,0
Part Tag Flag Cylinders Size Blocks
0 usr wm 1 - 512 1024.00MB (512/0/0) 2097152
1 usr wm 513 - 1024 1024.00MB (512/0/0) 2097152
2 unassigned wu 0 0 (0/0/0) 0
3 usr wu 1025 - 1057 66.00MB (33/0/0) 135168
4 unassigned wu 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 0 0 (0/0/0) 0
The reason is I am attempting to 'simulate' a T3+ and slice 0 and 1 are for
SNDR.
--- - Shawn L. Evans - - mailto:s.evans@tricorind.com - - Phone: 1.618.632.9252 x247 - _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:06 EDT