From: UAdmnSUN@netscape.net
Date: Fri Mar 28 2003 - 07:10:18 EST
Dear Managers,
I am tryin to setup a home network with Ultra10/Redhat8/Wn98se with a Linksys EZX5SSW 5 port switch. Switch is autosencing 10/100. After I have connected my Redhat8 and Ultra10 to the switch I try to ping from redhat to U10 or vice-versa and I get host unreachable. My Redhat eth0 is
eth0 Link encap:Ethernet HWaddr 00:50:BF:FF:C0:04
inet addr:10.0.0.3 Bcast:10.0.0.15 Mask:255.255.255.240
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:49 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:2058 (2.0 Kb)
Interrupt:5 Base address:0x9000
My U10 hme0 is
hme0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 10.0.0.2 netmask ffffff00 broadcast 10.255.255.255
ether 8:0:20:9f:a:55
What I am doing wrong here?, Linksys manual says just to connect your systems to the switch. Please help me!!!!
Thanks in advance
__________________________________________________________________
Try AOL and get 1045 hours FREE for 45 days!
http://free.aol.com/tryaolfree/index.adp?375380
Get AOL Instant Messenger 5.1 for FREE! Download Now!
http://aim.aol.com/aimnew/Aim/register.adp?promos=380455
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:04 EDT