From: adyas@twowaytv.co.uk
Date: Mon Mar 24 2003 - 11:30:23 EST
Hi,
Our Sun Blade 100 will not boot without the keyboard plugged in.
With a terminal connected to the serial port, and no keyboard plugged
in, booting with -a -v gets as far as :
......
root filesystem type [ufs]:<RETURN>
Enter physical name of root device
[/pci@1f,0/ide@d/disk@0,0:a]:<RETURN>
-
Then nothing. Sending a break gets me an OK prompt, but typing 'go' has
no further effect.
Booting with a keyboard / monitor is fine.
Any ideas?
Thanks,
Alex
-- -= alex dyas - broadcast support engineer - twowaytv - uk =- _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:03 EDT