From: Husemann, Harald (harald.husemann@Materna.DE)
Date: Tue Mar 18 2003 - 05:36:43 EST
Managers,
at the moment, we're "playing around" with the SUN StorEdge Availability
Suite in a SUN Cluster 3.0 Environment.
I've read the documentation, and saw the following:
"The configuration location needed for the Availability Suite must be under
Device ID (DID) Control only, it cannot be under Volume-Manager control. I.
e. it cannot be part of a diskset, and it cannot reside on the boot-device.
Also, the disk must not be used as a quorum device."
Hmmmm... As far as I understand, I have to configure a volume on a disk as
configuration location, and this disk cannot be used to store any data
anymore - wasting almost the whole diskspace, since I have to use a 18
GB-HDD, and the config location just needs 5,5 MB...
Is this right?! I can't imagine, but it seems that's was the docu tells me.
Anyone made experiences with this, and can tell me if I'm right?
Thanks,
and keep on hackin',
Harald
============================================
Harald Husemann
Systems Engineer
Teammanager Unix administration and Configuration Management
Materna Gmbh - Vo_kuhle 37 -
D-44141 Dortmund, Germany
Phone: +49-231-5599-8684
Mobile: +49-179-2300651
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:26:00 EDT