From: rmck (rmckeever@earthlink.net)
Date: Wed Mar 12 2003 - 17:31:23 EST
Hello,
I have a Western Digital 80gb drive that my Ultra 5 Solaris 9 system says
is only 74gb? ( did boot -r, and labeled it) Any idea on how to get my
system to see the whole 80gb drive:
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t0d0 WDC WD800JB-00CRA1 cyl 38307 alt 2 hd 16 sec 255
/pci@1f,0/pci@1,1/ide@3/dad@0,0
1. c1t2d0 IBM cyl 11482 alt 2 hd 5 sec 312
/pci@1f,0/pci@1/pci@1/SUNW,isptwo@4/sd@2,0
Specify disk (enter its number): 0
partition> p
Current partition table (original):
Total disk cylinders available: 38307 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 unassigned wm 0 0 (0/0/0)
0
1 unassigned wm 0 0 (0/0/0)
0
2 backup wu 0 - 38306 74.53GB (38307/0/0)
156292560
3 unassigned wm 0 0 (0/0/0)
0
4 unassigned wm 0 0 (0/0/0)
0
5 unassigned wm 0 0 (0/0/0)
0
6 unassigned wm 0 0 (0/0/0)
0
7 unassigned wm 0 0 (0/0/0)
0
partition>
Thanks up front
Rob
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:58 EDT