From: Mike Myers (mikemyers739@hotmail.com)
Date: Mon Mar 10 2003 - 10:55:26 EST
Well I am sad to say that I had only a couple of responses and more for a
posted summary. I had the latest patch and all jumpers are in the correct
position as suggested below by Colin. However that was one of the few real
suggestion that I received! If someone else has an idea, PLEASE let me
know...TIA Mike
Hi Mike;
One think you might want to look into is the firmware revision.
There are two PCI related bugs on older firmwares, one of which
cryptically says...
"Ultra-60/80 OBP slot-names property for pci devices is wrong."
The patch for firmware is 106455-11.
The other thing is to make sure that the CPU speed jumper is
set properly. J3001 should be across pins 1-2 for the 300 and 360MHz
CPUs (divide-by-three mode), and pins 2-3 for the 450MHz processors.
Hope this helps.
Colin Bigam
---- Original Message -----
From: "Mike Myers" <mikemyers739@hotmail.com>
Date: Thursday, March 6, 2003 9:14 am
Subject: PCI Slot Issues
>Dear Guru and Gurettes,
>
>I have had one of my engineers ask me a question that I can't find an
>answer to. He has an Ultra 60 and he tells me that his PCI slots are
>reading 54 MHz instead of 33 MHz and the other slot is reading 108 MHz
>instead of 66 MHz. I am a little puzzled because it does not make sense to
>me. I figure this is a fairly simple crossing of something, but I can't
>seem to put my finger on it...I will summarize...thanks for helping the one
>who has giving up Mountain Dew for Lent...No wonder I can't think!!!
>
>Mike
>
_________________________________________________________________
The new MSN 8: smart spam protection and 2 months FREE*
http://join.msn.com/?page=features/junkmail
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:57 EDT