From: Newton, David (David.Newton@divine.com)
Date: Thu Mar 06 2003 - 16:49:18 EST
Hello list,
I am attempting to turn a Sol8 box into a NetBackup media server. The
library contains two Sony AIT-3 drives and is hooked up via an LVD SCSI
controller. I can see the two drives and the robot via OBP with the
probe-scsi-all command. I can not seem to get the OS to detect the
drives. I contacted Veritas support and was instructed to add the
following to my /kernel/drv/st.conf file.
tape-config-list =
"SONY SDX-500C", "SONY 8mm AIT2", "SONY_AIT",
"SONY SDX-700C", "Sony AIT3 8mm", "SONY_AIT3";
SONY_AIT = 1,0x36,0,0x9639,4,0x0,0x0,0x0,0x0,0;
SONY_AIT3 = 1,0x36,0,0xd679,4,0x00,0x00,0x00,0x00,0;
... and then did a boot -r...
I have also followed the instructions provided by VRTS in the
MediaMgr_DeviceConfig_Guide.txt file to no avail.
What is the secret to getting Solaris to recognize a tape library? Is
there a good document somewhere on SCSI configuration? I've been
working this issue for most of the last 1.5 days and I'm starting to
pull my hair out!
Thanks in advance,
Dave
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:57 EDT