From: Wood, Lawrence N (LWood@ALLEGROMICRO.com)
Date: Wed Feb 26 2003 - 11:33:22 EST
I got a few replies from folks with very good suggestions but
none that led to a resolution. Ultimately, I was connected with someone
from TechSource who sent me a patch. The patch itself did not clean up
the problem but may have been a factor. What I think resolved the issue
was this:
I tried executing fxtconfig -prconf and found some interesting
info, amongst which was the following:
EDID Data:
Standard Timing: 1600x1200x60, 1280x1024x60,
1280x960x60.....etc
I was trying resolutions with a higher third number because I was
led to believe that at 60, there would be interference from our
power source and/or fluorescent lighting. With the resolution set
at 1600x1200x60, it is working beautifully and I am getting all the
crispness I expected from this card and monitor with no video
dropout.
Thanks Pablo and Alex for your replies.
-----Original Post-----
I have installed one of these in my SunBlade 2000 machine. I downloaded
the drivers from the TechSource web site and installed them. Problem is
the ViewSonic monitor I plugged into it keeps dropping out, almost like it
is momentarily losing the video signal. Anybody see this before or have
any ideas how I might resolve this or even IF it can be resolved.?
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:53 EDT