Can't read disk label

From: bhav POPAT (bhav816@mysun.com)
Date: Fri Feb 21 2003 - 08:50:30 EST

• Next message: German, Vinnie: "SUMMARY: can not configure dmfe1 on a V100 ... ???"
• Previous message: Olaf Hopp: "OT: convert MMDF mailboxes into mbox-format"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi,

I've had to reinstall Solaris8 on a Ultra 10 and get the following
error. I've done some research and tried out the following but no
result and am hoping somebody may help.

>From PROM, here were my results.

> printenv boot-device => disk
> setenv boot-device cdrom, boot cdrom => "Can't read disk label, Can't
read disk label package, Can't open boot package"
> show-disks
a) /pci@1fo/pci@1,1/ide@3/cdrom
b) /pci@1fo/pci@1,1/ide@3/disk
c) /pci@1f,0/pci@1/ebus@1/fdthread@14,3032fo
q) no selection

> nvalias mydev /pci@1f,0/pci@1,1/ide@3/cdrom,):f
boot mydev => "Can't read disk label, Can't read disk label package,
Can't open boot package"

>probe-ide
Device 0 (Primary Master)
    ATA Model ST39140A
Device 1 (Primary Slave)
Removable ATAPI model CRD-8322B
Device 2 (Secondary Master)
    ATA Model ST39140A
Device 3 (Secondary Slave)
    Not present

What can I try next ....

Cheers,
Bhav
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: German, Vinnie: "SUMMARY: can not configure dmfe1 on a V100 ... ???"
• Previous message: Olaf Hopp: "OT: convert MMDF mailboxes into mbox-format"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:51 EDT