From: Peppe (peppe-71@libero.it)
Date: Wed Feb 19 2003 - 09:42:59 EST
I have an E4500 and this is the output of prtdiag (only the I/O section):
========================= IO Cards =========================
Bus Freq
Brd Type MHz Slot Name Model
--- ---- ---- ---------- ----------------------------
--------------------
1 SBus 25 0 QLGC,isp/sd (block) QLGC,ISP1000U
1 SBus 25 1 lpfs/sd (block) LP9002S
1 SBus 25 2 SUNW,hme SUNW,501-2919
1 SBus 25 3 SUNW,hme
1 SBus 25 3 SUNW,fas/sd (block)
1 SBus 25 13 SUNW,socal/sf (scsi-3) 501-3060
3 SBus 25 0 QLGC,isp/sd (block) QLGC,ISP1000U
3 SBus 25 1 lpfs/sd (block) LP9002S
3 SBus 25 2 SUNW,qfe SUNW,sbus-qfe
3 SBus 25 2 SUNW,qfe SUNW,sbus-qfe
3 SBus 25 2 SUNW,qfe SUNW,sbus-qfe
3 SBus 25 2 SUNW,qfe SUNW,sbus-qfe
3 SBus 25 3 SUNW,hme
3 SBus 25 3 SUNW,fas/sd (block)
3 SBus 25 13 SUNW,socal/sf (scsi-3) 501-3060
Two LP9002S connect a clarion array to the server.
This is the output of format:
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1t8d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
/sbus@3,0/QLGC,isp@0,10000/sd@8,0
1. c1t9d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
/sbus@3,0/QLGC,isp@0,10000/sd@9,0
2. c1t10d0 <SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
/sbus@3,0/QLGC,isp@0,10000/sd@a,0
3. c1t11d0 <SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
/sbus@3,0/QLGC,isp@0,10000/sd@b,0
4. c1t13d0 <SUN9.0G cyl 4924 alt 2 hd 27 sec 133>
/sbus@3,0/QLGC,isp@0,10000/sd@d,0
5. c8t15d1 <drive type unknown>
/sbus@2,0/lpfs@1,0/sd@f,1
6. c8t15d2 <DGC-RAID10-0099 cyl 61438 alt 2 hd 256 sec 12>
/sbus@2,0/lpfs@1,0/sd@f,2
7. c8t15d3 <drive type unknown>
/sbus@2,0/lpfs@1,0/sd@f,3
8. c8t15d4 <DGC-RAID10-0099 cyl 61438 alt 2 hd 256 sec 12>
/sbus@2,0/lpfs@1,0/sd@f,4
9. c9t9d0 <drive type unknown>
/sbus@6,0/lpfs@1,0/sd@9,0
10. c9t9d1 <DGC-RAID10-0099 cyl 61438 alt 2 hd 256 sec 12>
/sbus@6,0/lpfs@1,0/sd@9,1
11. c9t9d2 <drive type unknown>
/sbus@6,0/lpfs@1,0/sd@9,2
12. c9t9d3 <DGC-RAID10-0099 cyl 61438 alt 2 hd 256 sec 12>
/sbus@6,0/lpfs@1,0/sd@9,3
13. c9t9d4 <drive type unknown>
/sbus@6,0/lpfs@1,0/sd@9,4
Specify disk (enter its number):
My question is: The path /sbus@2,0/lpfs@1,0/ is associated to the first (board
1) or second (board 3) LP9002S??
Thank you in advance.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:50 EDT