From: Francis, (IT) Peter (pfrancis@petrotrin.com)
Date: Tue Feb 11 2003 - 22:31:25 EST
Good Day
I recently attached an A1000 (218GB) to an Ultra60 running solaris 2.6. I
did a probe-scsi-all and the drive was detected. However, when I using the
format command to display the partitions and the sizes . I am not seeing the
correct sizes. The / has 6k bytes , all the other partitions have 0
bytes. I did a boot -r no change resulted. I did not install the Raid
Manager software because the documents states the Array is already
preconfigured.
Any suggestions to overcome this problem ?
Acceptance of this message implies that you have read, and that you accept,
PETROTRIN's Email Disclaimer which can be found at
http://www.petrotrin.com/Email_disclaimer.htm
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:48 EDT