Scripting Jumpstart Client Additions

From: Steve Chapman (schapman@ejasent.com)
Date: Wed Feb 05 2003 - 22:15:59 EST

• Next message: Richard Russell: "iPlanet JSP classpath"
• Previous message: David Swanlund: "SUMMARY: netra T1 105 and D1000 - cannot see disks"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

There are a lot of steps and checks that need to be made when setting up a
client for Jumpstart... (add client system and IP to /etc/hosts and
sysidcfg, hostname and ethernet address in /etc/ethers, etc.)... Have any
of you created or found a script yet that would prompt an admin for the info
and then plug the values into the necessary files?

I don't want to re-invent a wheel that may already be out there and
available, and probably written better than anything I could do...

Will definitely summarize!

Thanks!

Steve Chapman
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Richard Russell: "iPlanet JSP classpath"
• Previous message: David Swanlund: "SUMMARY: netra T1 105 and D1000 - cannot see disks"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:46 EDT