From: Wong, Ivan (Ivan.Wong@fujitsu.com.au)
Date: Wed Feb 05 2003 - 01:09:52 EST
Hi,
Seems that patch 112186-08 needs to be applied.
Thanks to the following for their input:
Stalin Arokiaroj
Tim Hespe
mh1272
> -----Original Message-----
> From: Wong, Ivan
> Sent: Wednesday, 5 February 2003 10:45 AM
> To: sunmanagers@sunmanagers.org
> Subject: prtdiag weirdness
>
>
> Hi all,
>
> A customer has a Sun Fire V880 running on solaris 8. When I run the
> command prtdiag from /usr/platform/SUNW,Sun-Fire-880/sbin, it shows me
> all the details one would expect, however it doesn't give out
> any memory
> info as shown below:
>
> System Configuration: Sun Microsystems sun4u Sun Fire 880
> System clock frequency: 150 MHz
> Memory size: 4096 Megabytes
>
> ========================= CPUs
> ===============================================
>
> Run E$ CPU CPU
> Brd CPU MHz MB Impl. Mask
> --- --- ---- ---- ------- ----
> A 0 750 8.0 US-III 5.4
> A 2 750 8.0 US-III 5.4
>
> ========================= Memory Configuration
> ===============================
>
> Logical Logical Logical
> MC Bank Bank Bank DIMM Interleave
> Interleaved
> Brd ID num size Status Size Factor with
> ---- --- ---- ------ ----------- ------ ----------
> -----------
> Cannot find any memory bank/segment info.
>
>
> Any reason why it can't find any info about the memory on the box? Is
> it something do to with the OBP version? The OBP version is
> 4.5.12. Or
> is there a patch that needs to be applied?
>
> Thanks for the help & will summarise.
> _______________________________________________
> sunmanagers mailing list
> sunmanagers@sunmanagers.org
> http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:46 EDT