From: Alen Pezelj (alen.pezelj@ht.hr)
Date: Fri Jan 24 2003 - 16:49:31 EST
I have two Sun Netra T1 AC200 servers with
Kernel version: SunOS 5.8 Generic 108528-12 September 2001
and I have three interfaces, heartbeat, operational and control interfaces
on every node.
After I configured the StoneBeat FullCluster (file node.conf) , I've get this
messages from sbfcd deamon:
couldn't open file "/dev/sbif-ctl": No such file or directory
couldn't configure StoneBeat FullCluster driver
StoneBeat module exited abnormally with code 1
node.conf looks as:
#
# Generated by /opt/dnscluster/bin/sbfcconfig
#
node-id=2
load-interval=60
control-port=3002
cluster-id=100
operative=sbif0
control=sbif1
capacity=562
protocol=sbif2 9:3:ba:13:82:f7
control-ip=192.168.1.65
Do somebody have any idea?
Thanks!
Alen Pezelj
alen.pezelj@ht.hr
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:43 EDT