From: Michal Wellum (mike.wellum@linmor.com)
Date: Thu Jan 23 2003 - 16:05:18 EST
I was recently told and shown an ultra 10 running a 40 gig maxtor 7200 rpm
drive
I purchased a maxtor DiamondMax 9 7200 rpm drive and installed it as the
primary slave. I also replaced the primary drive with a 20 gig baracuda. The
40 gig drive initially came up with a bad magic number. I booted into
single-user mode and fixed the label with format.
Now I go to install solaris 7 (i know it's old, but it was the requested
environment). When I get to my partition selection, it shows the baracude as
19.1 gigs which is normal, but it shows the 40 gig maxtor as a 6 gig drive!
Any ideas at all about how to correct this issue? I really really need the
space....
The maxtor model is a 6Y040L0
Thanks all!
Mike Wellum |
Systems Analyst | PH33R My L33T SKiLLz!
Linmor Technologies |
(613)727-2757 x283 |
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:39 EDT