From: Rierson Robert Civ OC-ALC/MASLA (Robert.Rierson@tinker.af.mil)
Date: Fri Jan 17 2003 - 08:50:09 EST
Hello fellow admin's
We have been getting an unusual error/warning message on our backup host
upon the completion of a tape. When a tape becomes full we get the message
about unexpected block size. The tape backup host is configured as follows
Solstice Backup 5.1.1 on SPARC20 running Solaris 7. Three attached tape
drives backing up approx 200GB per week.
0cbn is a Storedge L280 (35/70GB) DLT
1cbn is a DEC/Compaq/HP - TZ887 (20/40GB) DLT
2cbn is a DEC/Compaq/HP - TZ887 (20/40GB) DLT
The errors only happen on the DEC drives and don't appear to cause any
problems. We are able to read/write from them fine and recover file systems
without any errors or issues.
Thisi s just one of those annoying things that you know something is
configured wrong but don't know how to fix and want to get it write. Any one
have any suggestions?
Thanks, Error from daemon.log follows
01/16/03 22:26:13 nsrd: media notice: dlt tape TIF.Incr.02.12.04 on
/dev/rmt/2cbn is full
01/16/03 22:26:13 nsrd: media notice: dlt tape TIF.Incr.02.12.04 used 65 GB
of 10 GB capacity
01/16/03 22:26:41 nsrd: media notice: volume "TIF.Incr.02.12.04" on device
"/dev/rmt/2cbn": read 32770 bytes, expected block size of 98304, check
system device con...
01/16/03 22:28:15 nsrd: media info: verification of volume
"TIF.Incr.02.12.04", volid 21871 succeeded.
01/16/03 22:28:46 nsrd: write completion notice: Writing to volume
TIF.Incr.02.12.04 complete
Robert Rierson
robert.rierson@tinker.af.mil
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:37 EDT