From: randeep guha (monti_guha@rediffmail.com)
Date: Wed Jan 08 2003 - 11:24:34 EST
Hello sirs,
A very Happy new year to all!!!
I have a specific problem on our site.
1)Our onboard ethernet card is not working properly.
Though ifconfig command specifies the IP address
for the card , when connected to switch/hub the data transfer
doesnot take place.We have tested with 2 more hubs, but result is
same.
It is a 10 mbps hub.
We have purchased 1 third party PCI card for the SUN Ultra5.
How to install the card with the machine.
How to delink the onboard card , so that the external card is
recognised,& we can assign the IP address to it.
2) We have two subnets, 192.168.242.xxx and 10.207.xxx.xxx
what is the best way to establish a communication between them,
both thru a external router(with configurations) or treating
any SUN machine as a router.
Thanks,
Randeep
Guha
Programmer,India
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:33 EDT