From: Dinesh Ramchandani (dineshrr@ureach.com)
Date: Sat Jan 04 2003 - 01:40:22 EST
Hi all,
I am facing problem in removing tape devices which are
previously configured.
System is E-3500 with Solaris 8 installed.
Previously Sun StorEdge L3500 was configured with 4 drives in
system.
SCSI IDs of drives are 1 2 3 & 4 respectively.
System identified this as a 1cb, 2cb, 3cb and 4cb.
and this drives were connected to "sbus@2" IO board:1.
Now new L40 LTO has been brought.
I have to connect this L40s' two drives to the same IO Board
and card i.e. "sbus@2" IO Board:1.
I tried to run "devfsadm -C -c tape" to clear previously
configured devices..... but its not removing and links.
and as the SCSI IDs of this drives are also 1 2 3 4 but I can't
change the SCSI IDs too as this should be dual hosted.
I can't run "cfgadm" too as this IO board has storage A3500FC
conneted with it.
Can anyone help me in removing this previously configured
devices???
Regards,
Dinesh R
________________________________________________
Get your own "800" number
Voicemail, fax, email, and a lot more
http://www.ureach.com/reg/tag
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:32 EDT