From: Steve Renner (srenner@idleshell.net)
Date: Thu Jan 02 2003 - 22:50:24 EST
Hey all-
I have a previously known working jumpstart server (I won't rule out that
its gone bad!) that I am using with a Solaris 8 (02/02) flash image to
jumpstart a Netra t 1120/1125 system.
When I go to jump the system it comes back with one of those not so
friendly data access error messages, not the MMU misses that you get with
the wrong cd version for the procs but just a simple Data Access Error.
---[begin snip]---
Netra t 1120/1125 (2 X UltraSPARC-II 440MHz), No Keyboard
OpenBoot 3.23, 1024 MB memory installed, Serial #13557605.
Ethernet address 8:0:20:ce:df:65, Host ID: 80cedf65.
{0} ok boot net - install
Boot device: /pci@1f,4000/network@1,1 File and args: - install
Timeout waiting for ARP/RARP packet
4200 Data Access Error
{0} ok
---[end snip]---
Here is the output from a snoop on the jumpstart box (not much):
---[begin snip]---
BROADCAST -> (broadcast) RARP C Who is 8:0:20:ce:df:65 ?
jumpstart01-la -> laded RARP R 8:0:20:ce:df:65 is 10.231.6.55, laded
laded -> jumpstart01-la TFTP Read "0AE70637" (octet)
jumpstart01-la -> laded TFTP Data block 1 (512 bytes)
laded -> jumpstart01-la TFTP Ack block 1
jumpstart01-la -> laded TFTP Data block 2 (512 bytes)
jumpstart01-la -> laded TFTP Data block 2 (512 bytes)
jumpstart01-la -> laded TFTP Data block 2 (512 bytes)
jumpstart01-la -> laded TFTP Data block 2 (512 bytes)
jumpstart01-la -> laded TFTP Data block 2 (512 bytes)
---[end snip]---
Unfortunately I am not on site with the box so I can't test all of its
hardware but I can perform a probe-scsi-all and see both internal SCSI
drives.
anyone?
thanks,
Stephen
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:32 EDT