problem disk array on solaris

From: jimi beyylorn (jimbeyyl@yahoo.com)
Date: Sun Dec 22 2002 - 05:26:14 EST

• Next message: Santhakumar Sivasingam: "Quick question - send mails only"
• Previous message: george goffe: "searching for obp upgrade for sparc 20 and ross cpu"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

hello all,

i configure two raid and two lun ( lun 0 set raid 0+1 & lun 1 set raid 5 ) in external disk array storage contain 8 scsi hard disk.

Now , i use command probe-scsi-all in ok mode and system detected this disk array in Target 2.

But when boot solaris 8 sparc with command boot -r solaris can not configure this disk array . for example command :

 # format display only hard disk .cannot display disk array.

also in /dev/rdsk & /dev/dsk display only hard disk & cdrom address.not exist disk array address .

also ,i use commands # devfsadm & edit /kernel/drv/sd.conf for two lun # cfgadm for configure .

but i cannot ,i unknown how slove this problem.

please help me

thanks
Yahoo! Mail Plus - Powerful. Affordable. Sign up now
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Santhakumar Sivasingam: "Quick question - send mails only"
• Previous message: george goffe: "searching for obp upgrade for sparc 20 and ross cpu"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:30 EDT