From: Ole Martin Refvik (ole-martin.refvik@aston.no)
Date: Wed Dec 18 2002 - 07:37:01 EST
Hi, Everyone.
On one Sun Ultra Enterprise 420 R i have a problem not
getting it to boot properly.
I have tried booting from: hard-drive, cdrom and also the net (bootp)
However it just stops after it has checked all the memory, and there is no
way
i have found to get it to ok prompt.
I tried to press Stop-A, and also run Diagnostic, but can't find out what is
wrong.
(Also tried to set NVRAM to default settings (Stop-N))
I also tried switching the NVRAM module from a similar working server, but i
had the same result.
This is what i get at the console:
screen not found.
Sun Enterprise 420R (4 X UltraSPARC-II 450MHz), Keyboard Present
OpenBoot 3.23, 2048 MB memory installed, Serial #13743795.
Ethernet address 8:0:20:d1:b6:b3, Host ID: 80d1b6b3.
Is there anyone here who know what may be wrong?
Any suggestion to what may be wrog is apreciated:)
Thanks.
------------------------
Ole Martin Refvik
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:29 EDT