From: Stoyan Angelov (s_angelov@filibeto.org)
Date: Fri Dec 13 2002 - 05:26:28 EST
Hello,
I have upgraded one of our servers (e450 with 4 x StorEdge A1000 Raids)
adding 5th A1000.
Raid Manager can see the new storedge. I have upgraded the firmware to
v.03.01.04.68, created lun0 (raid5 using all disks).. format completed
successfuly. the problem is that the format command does not see the new
device. tried rebooting with boot -r, nvutil, lad and raidutil all see
the device... i also see lines in /var/adm/messages like this:
Dec 13 11:41:22 hostnamegoeshere scsi: [ID 107833 kern.warning] WARNING:
/pci@4,4000/scsi@4/sd@9,0 (sd38):
Dec 13 11:41:22 hostnamegoeshere scsi: [ID 107833 kern.warning] WARNING:
/pci@4,4000/scsi@4/sd@9,0 (sd38):
Dec 13 11:41:22 hostnamegoeshere corrupt label - wrong magic number
Dec 13 11:41:22 hostnamegoeshere corrupt label - wrong magic number
and still i can not see the device under format. could it be something
wrong in rdriver.conf ? i noticed that all my previous raids have a
different number in the "modules=" section in rdriver.conf and the new
raid has the same number as an existing raid (module=3).
raida -> module=3
raidb -> module=1
raidc -> module=4
raidd -> module=2
raide -> module=3
could this be the problem ?
..do you have any suggestions ?
thank you for your time!
Stoyan Angelov
-- Stoyan Angelov filibeto.org e-mail: s_angelov@filibeto.org http://www.filibeto.org _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:27 EDT