getting a Wyse-120 to work with an UltraSparc Enterprise

From: Olivier Kaloudoff (kalou@kalou.net)
Date: Fri Dec 06 2002 - 12:52:55 EST

• Next message: Jim Southerd: "Summary: Simple question ..."
• Previous message: Monappallil, George: "sun certification"
• Next in thread: Olivier Kaloudoff: "Re: getting a Wyse-120 to work with an UltraSparc Enterprise"
• Maybe reply: Olivier Kaloudoff: "Re: getting a Wyse-120 to work with an UltraSparc Enterprise"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi People,

        I just bought a wonderful sun, without any screen, and
had finaly the chance to get a Wyse-120.

        So I plan either to boot blindly it from the network with
DHCP, TFTP, NFS, and a floppy.

        or to plug in a serial cable and have a screen with my
Wyse...

would you have any advices ?

Best Regards,

Olivier Kaloudoff
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Jim Southerd: "Summary: Simple question ..."
• Previous message: Monappallil, George: "sun certification"
• Next in thread: Olivier Kaloudoff: "Re: getting a Wyse-120 to work with an UltraSparc Enterprise"
• Maybe reply: Olivier Kaloudoff: "Re: getting a Wyse-120 to work with an UltraSparc Enterprise"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:26 EDT