From: SysAdm (sunadmin@norsar.no)
Date: Fri Nov 15 2002 - 02:11:04 EST
Original post:
> I'm considering LDC-monitors (or non-Sun CRTs).
>
> Does PGX64 or Expert3D-Lite frame buffers require a valid senseID
> from the monitor, or is it possible to use max. resolution and refresh
> rate on non-Sun monitors as well?
>
> When connecting non-Sun monitors to frame buffers like Creator3D,
> we only get 1152x900x66Hz...
>
> Any recommendations on good LCD monitors for Sun (SunBlade) ?
Apparently, m64config and fbconfig does the trick. I have had problems
with this, some monitors does not support the same frequency as the
graphics board support...
Or, optionally, eprom setting:
setenv output-device screen:r1024x768x66
- Nils
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:17 EDT