From: Marcelino Mata (mmata@multimatic.com)
Date: Thu Nov 14 2002 - 09:56:33 EST
I moved a network card back and forth between a 33Mhz PCI slot to a 66Mhz
slot on E250.
I ran "boot -r" between all the moves.
I am now getting a "No response from Ethernet network..." from the card.
The E250 has two PCI network card along with the onboard network card.
I ran "prtdiag -v" and I think the move was not recognized by Solaris 8.
Here is the output :
========================= IO Cards =========================
Bus Freq
Brd Type MHz Slot Name Model
--- ---- ---- ---- --------------------------------
----------------------
SYS PCI 33 0 pciclass,068000
SYS PCI 33 0 pci108e,1001 SUNW,cheerio
SYS PCI 33 0 pciclass,010000 QLGC,ISP1040B
SYS PCI 33 1 pciclass,020000 SUNW,qsi-cheerio
SYS PCI 33 2 TSI,gfxp GFXP
SYS PCI 33 3 pciclass,001000 Symbios,53C875
Does anyone know a command to rebuilt the PCI address or how to clear the
current PCI addresses so it is rebuilt on boot -r?
Marcelino
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:17 EDT