From: O'Neill, Paul (IT) (Paul_O'Neill@adc.com)
Date: Wed Nov 13 2002 - 12:36:53 EST
> Dear Sunmanagers,
>
> Thanks to the following for their advice and help:
>
> Jed Dobson
> Sergio Luiz Novaes
> Tim Chipman
> Charlie Giannetto
> Deborah Crocker
> Will Parsons
>
> It is possible to attach more than one host to a single T3+ array (with
> 1Gb cache
> controller). The required firmware is 2.1.0 (or greater). This version of
> firmware
> also supports up to 16 LUNs per tray. The number of hosts supported
> depends on
> the application workload.
>
> From my reading and discussions with other people, I would recommend
> testing this
> configuration before using it in a production environment. We are planning
> to use
> this configuration in a test environment, but performance is still an
> important
> requirement for us. I would also check with your local Sun Support
> provider to
> ensure that your implementation is supported.
>
> regards,
>
> Paul
>
>
> =====================================================
> Dear Sunmanagers,
> We would like to connect four Sun 280R servers
> to a Sun fibre
> attached disk array. Has anyone ever achieved this by connecting the
> servers via
> an FC-AL switch to a Sun Storedge T3 Array for the Workgroup?
>
> I have checked the available datasheets and configuration documents, but
> I've not
> seen this configuration mentioned. I've also spoken to our Sun re-seller
> and they are
> not sure it this configuration is possible or supported by Sun.
>
> Thank you in advance and I will summarise the replies.
>
> regards,
>
> Paul O'Neill
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:16 EDT