From: Chris Denneen (sunmanagers@ghostspace.com)
Date: Wed Nov 13 2002 - 11:11:20 EST
Currently been using our jumpstart server for setting up new boxes or
blowing away old boxes and starting from scratch.
I am wondering if there is a way to specify in the profile to mount up a
disk but do not 'newfs' it.
The reason for this is because we want to use a profile for re-jumping
certain types of machines but we want the data in /data c0t1d0s7 to be kept
and not formatted. Then after the jumpstart we want it to mount up /data by
having it in the vfstab.
The only way feasable I can see of doing this would be remove the line in
the profile pertaining to c0t1d0s7 and leave it out.
Then create a finish script that adds the correct line to the end of vfstab.
I was hoping there was an option to label the partition but do not format
it.
Any one run into this or have any suggestions?
Thanks,
Chris
-- Chris Denneen <sunmanagers@ghostspace.com> _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:16 EDT