From: Sridhar (ssridhar@raven.pnu.com)
Date: Thu Nov 07 2002 - 11:43:18 EST
We have an Ultra10 workstation that keeps rebooting. During reboot it finds
block errors on system partition and corrects them but after that it scrolls
some PCI errors (simba-0, PCIPSY-0, "PCI fault log start" "PCI primary error"
are some of the words I remember seeing). It then dumps everything onto swap
and reboots. During next reboot it finds the same block errors it had fixed
before and the cycle starts. I am not able to boot off cdrom as it still goes
through same error sequence. Is something wrong with hardware? Once I was
successful in booting off of cdrom. I then was able to repair the system disk
using fsck. But after reboot it went into same sequence of errors. During
reboot, somehow the system disk gets corrupted. I would like get some data off
of the system disk. What is the best course of action here?
thanks
Sridhar
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:14 EDT