From: Moughan, Laurence (Laurence.Moughan@o2.com)
Date: Mon Oct 21 2002 - 04:45:47 EDT
Hi All,
I have an inhereted 280R with Sol 8, and end users required a trust setup
with another host ( for rcp rsh etc while i wait ssh licence for box ) -
this was done no problems,
However oddity when rcp - see below; ( ip's changed )
$ rcp user@194.125.122.70:/dir/subdir/testfile .
::ffff:194.125.122.70: unknown host
seems to be translating the ip into ipv6 format. However using hostnname in
command works fine. End user wants to script based on the IP rather than
hostname ....so - clues ? i assume ipv6 was enabled when sol8 was installed.
Any workaround ?
I tried ( from the rcp man page ) to use square brackets around my proably
wrong ipv6 address [::fff0:194.125.122.70] but this came up same issue.
Thanks
Laurence
****************************************************************************************
This E-mail is from O2. The E-mail and any files
transmitted with it are confidential and may also be privileged and intended
solely for the use of the individual or entity to whom they are addressed.
Any unauthorised direct or indirect dissemination, distribution or copying
of this message and any attachments is strictly prohibited. If you have
received the E-mail in error please notify postmaster@O2.com or
telephone ++ 353 1 6095000.
*****************************************************************************************
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:08 EDT